Not only are there many details in life that we need to pay attention to, but there are also many things that we need to pay attention to in the tile paving of the house. We all know that when decorating a house, it is not just the paving on the ground. The precautions for laying ceramic tiles on the wall and the laying of ceramic tiles on the wall are different. So what are the precautions for laying ceramic tiles? Let’s come together and find out!
1. Things to note when laying ceramic tiles on the floor
1. Soak the tiles
We still need to check before laying the tiles. The method of laying tiles on the wall is the same as soaking the tiles in water without bubbling, but it will take longer, half a day.
2. Protect the waterproof layer
More attention needs to be paid to places such as kitchens and bathrooms that require waterproofing. During the construction process, the waterproofing layer must be protected and the original waterproofing layer must not be damaged. We need to do a series of waterproofing treatments for the kitchen. There needs to be a suitable slope for running water in the bathroom, and there should be no accumulation of water or backflow of water. After the tiles are laid, we also need to conduct a 12-hour inspection to check that there will be no leakage of water.
3. Do not step on the tiles immediately after they are installed
Don’t step on the tiles immediately after they are installed. We need to cover them with cardboard, and it needs to be at least 24 hours before you can step on them again. After the tiles are laid, we must pay attention. An hour after the tiles are laid, we must clean up all the cement, caulking and other stains remaining on the tiles during the previous decoration process. Once the time has passed, the above Residues are difficult to remove, so remember to clean them up in time.
2. Things to note when installing ceramic tiles on the wall
1. Clean all the stains on the wall in advance and wet the wall
If our wall is new, we can wait until the cement is 70% dry before we can proceed with the following work such as arranging bricks, springing lines and laying tiles. If we are laying ceramic tiles, we need to check that the ceramic tiles can be soaked in water for about two hours. If there is no bubbling, they can be used. We can use them after the ceramic tiles are dry.
2. Do not use some broken tiles to piece together and paste the wall
During the process of laying ceramic tiles, we may encounter pipelines.To close the sockets and some fixed equipment, we need to use the whole tile to fit together. We must not use some broken tiles to piece together and paste the wall. This not only seriously affects the appearance, but also easily causes the tiles to fall off.
3. How to accept ceramic tiles
1. Check whether there is hollowing
After the tiles have been laid, we need to check and accept them. After 12 hours of laying the tiles, we need to check whether there is any hollowing in the tiles. We can gently tap the surface of the tiles with our fingers and listen to the sound. Is it different? If there is a hollow phenomenon, we will reattach it.
2. Check whether the tiles are laid horizontally and vertically
We also need to observe whether the tiles are laid horizontally and vertically, whether the direction is correct, whether there is any inversion, whether the mutual distance between the tiles is qualified, whether the surface of the tiles is flat, whether there are In case of damage, etc., we also need to pay more attention to these.
So you see there are still many things in life that deserve our attention. From the theme content that Tao Jun shared with you today, you will know that when decorating a house, there are still many things that deserve our attention when decorating a house. Pay attention, so the quality of many things is mostly reflected in the details. Well, the above is the content shared today. I hope it can be helpful to you, here you go!
